Even people who do surf on can usually guess what surfboard wax is and is. Obviously, it is a kind of wax surfers apply to their surfboards, especially on its upper surface or the bridge. But technically speaking, surf wax is not as your ordinary wax at home that you use for your brilliant floor smooth and sometimes slippery. In fact, it does the opposite.
Surfboard wax is a type of wax applied to the deck of your surfboard specifically formulated to prevent slippage of their paddle Board surfers or a wave. This wax is composed of natural and synthetic waxes such as paraffin, wax of bees and other hard waxes. Other formulations include petroleum jelly to produce softer varieties of waxes. To give wax an attractive and stimulating flavour, exotic scents like coconut or bubblegum nuts are added to the mixture. These surf wax however can also be applied to paddles for kayak-surf and dragon boats to increase adherence or handling.
Some surfboard wax are formulated for a particular temperature or climate. Most surf shops, you will find waxes of surfboard for hot or cold climates. It is very important to use good surf wax specifically adapted to the climate and water in your area. When a wax formulated for cold water is used in tropical surf spots, the wax will melt away leading to a slippery surfboard, gripless. Conversely, when the high temperature surf wax is used in very cold water, will harden and will not provide the necessary grip.
The application of surfboard wax can be done with or without the appropriate strategies. The average user will apply wax liberally across the full deck of the Board of Directors. You can even apply to specific areas, such as only where you plant your feet on the deck or on the rails to give you better hold when diving duck. But to the more meticulous and advanced user, the application of wax could mean much to its surfing performance. They will often apply a base coat first which is then topped with another type of wax. The base layer is usually more difficult that the layer of finish leading to the formation of small wax bumps that serve as excellent traction for your feet and body to stick to. If you do not use a base coat you can simply apply the wax by rubbing in small circles or forming diagonal lines. It follows a similar effect.
Surfboards waxed can be maintained using what is called a comb with wax. You can comb the waxed area to provide fresh engravings revive the handle makes it just like a newly waxed Council. When no amount of combing or rewaxing will improve the handle, it can be removed and replaced with a fresh and unused wax coat.
Withdraw your surfboard wax can be a laborious process. But with the good method, you can do in a few minutes. You can use a durable plastic scraper which is usually in the back of a comb from wax to scrape the wax into pieces, so save more time. However this may take time if you allowed a significant build-up of wax over time. I strongly discourage the use of direct direct with a blow dryer as heat from excessive heat to remove your surf wax, can cause delamination and ultimately damage the foam of your Commission.
While there is often inevitable residual wax left on the surface of the surfboard, even after scratching with a wax comb you can use a piece of cloth to get rid the remaining clumps of wax. You can also add some coconut oil or kerosene oil to increase the efficiency of the fabric. The use of solvents for this task is not recommended because this can damage the surface of your surfboard and even destroy the airbrush and works of art.
Try this method used by many people. Lie your surfboard in the dryer heat of the Sun (step stroke) on the side of the bridge for 10 - 15 minutes, no more than 15 minutes! Once the wax began to soften and make melt, rub sand on the deck of causing Council melted wax to stick to the surface of the sand particles. This prevents sand from re-sticking to the surface of the surfboard, enabling all the wax to remove both.
No comments:
Post a Comment