Bottom contours of surfboard explained

Today surfing craze has led the industry to extreme board design innovations, such as the bottom edges unique surfboard, which are scientifically proven to give surf boards the best performance in a variety of wave conditions. Surfboard designers took advantage of the principles of engineering hydrodynamic and technology of the modern day produce surfboard with performance qualities like never before. Focus more therefore focused on specific elements of surfboard design improvements have never had as much attention in the past.

One of them is at the bottom of the surfboard. It is part of a surfboard that takes contact with the wave. There are several bottom contours or configuration in the design of existing Council today. Even if each of these models contours can be applied to any type of surfboard, there are specific contours work best on a particular type of Board.

Flat bottom

Surfboards were originally shaped with flat bottom. As the name indicates, flat bottom boards are literally flat, having no contour, resulting in a very quick Board. Flat bottom surfboards are generally used for small mushy waves where you need that extra speed. Flat funds are however not ideal for the large waves riding because when the waves grow and more quickly, you won't need to worry about the speed, but more to be able to control the surfboard at high speed.

Generally, a flat bottom works well for all types of surfboards and more specifically is a choice for heavy surfers with the extra weight causes the drag. If you are a beginner, a flat bottom Board will be also better for you that these boards are the most stable and easiest to learn on. Some surfboards are designed with flat bottom that the length of surfboard, from nose to tail, while other boards are designed with flat areas combined with the other bottom edges.

Single Concave Contour

A surfboard with a single concave contour bottom has a concave shape that is bent towards the bridge of the Council until the tail running. This contour allows water under the Council to flow through a channel that grows accordingly water from the nose to the fins and tail, for example, acceleration of the Commission. Water is prevented from leaving rails, producing lift and additional speed. The unique design of concave contour is committed to providing boards of surfing with additional speed, which makes it perfect for surfing midsize, hollow, clean. That is why the single concave contour is a popular choice with visitors who are courageous enough to surf tight in the pocket of a wave. Longboards often have this contour near the front section of the surfboard to facilitate the easy nose riding.

Double Concave curvature

Double concave curvature pushes the water under the Council into two channels at the end of the surfboard tail and fins. However, the double concave curvature generally does not begin to the nose of a surfboard. It starts with a concave only nose and gradually transitions into two concave running all the way down the tail. This is why the double concave is usually near tail of the Commission. The single concave bottom of the surfboard product section a good surface for planning that gives the reader of the Council, while double concave part divides the water into two channels, making the Board loose and easy to handle - perfect for flowingin turn transitions.

VEE Contour

As its name suggests, you would easily guess what looks like a surfboard vee bottom. Well, you're right. It has the shape of the letter "v" which makes it the lowest point the stringer in the water. A jury of contoured bottom vee can also be combined with a simple or double concave. This type of bottom contour is preferable for rail-rail surf because it additional surfers take advantage for the manoeuvres which rotates quickly and easily.

Today, the vee bottom contour is commonly used in the military section of tail tips. Firearms and surfboards of big wave are also popularly shaped with v bottom, allowing the user to make quick changes in the direction then surf the huge, energetic waves. However, when you arrive straight, the vee bottom causes some drag, resulting in a loss of speed.

Channels

Background channels of surfboard featured multiple channels along the surface of the bottom of the surfboard. Sometimes, the number of channels in the Commission can reach up to 8 channels with several variations. As concave bottoms, it gives extra lift and increase speed. This low edge facilitates fast channeling of water through the tail of the Board, making the Commission go fast. However, many professional people are not funds use this substantive outline that it decreases the workability of their surfboards.